Horizon Fitness Bookletmaker SPF-200A Manual page 137

6-6 Replacing the Fore-edge Trim Knife
13
Move the lower knife forward
slightly.
1. Loosen the mounting screws at both ends
with an Allen wrench.
2. Turn each adjuster bolt 60 degrees clockwise.
- Turn the adjuster bolts evenly.
3. Tighten the mounting screws at both ends
and lock the lower knife.
4. Go back to step 11 and repeat the steps
again.
14
Turn off the power switch.
15
Lock the lower knife and the
adjuster bolt.
- Tighten the inside mounting screws with a
ratchet wrench.
- Tighten the mounting screw at both ends
again.
- Tighten the locking nuts for the adjuster bolts.
16
Attach the lower guides.
17
Attach all the parts which have
been removed.
60 degrees
Tighten after the position of
the lower knife is locked.
Lower Guide
Pipe Bracket
6-6-2
Lower Knife Replacement
21102
60602H1
21102
60602A1
21102
60602C1
21102
60602D1
Upper
Knife
21102
60601H1
129
6