The Stitch Position Varies; The Stitches Are Curved; There Are Problems With The Stitch Length - Horizon Fitness Bookletmaker SPF-200A Manual

5-3 Stitch-Related Problems

5-3-4 The Stitch Position Varies

Where to Check
There are no
gaps between
the sheets and
the top and bot-
tom guides, or
between the
sheets and the
stopper when the
sheets are
jogged.
Where to Check
When doing
saddle stitching -
The fold position
changes.

5-3-5 The Stitches Are Curved

Where to Check
The wire must be
straight.

5-3-6 There Are Problems With The Stitch Length

Where to Check
11119
50306A1
The stitch length
is too short, or
the position of
the opening is
not correct.
11119
50306B1
102
- See if the sheets move while they are being
- Adjust the following items to match the sheet
A A
B B
21102
50304B1
- Check if the folding position changes. Go to
11119
50304A1
- Adjust the angle of the eccentric shaft so that
11119
50305A1
- Turn
11119
50306C1
Adjustment Procedure
11119
50306E1
Cause and Solution
jogged. If the sheets move, there is a gap.
size using the Binding-Fine Adjust-Stitch Sec-
tion screen.
A Distance between the jog plate and the
stopper
B Top and bottom guide width
Cause and Solution
Section 5-5-2.
Cause and Solution
the wire is fed straight.
Cause and Solution
counter-
clock-
wise to
lengthen
the stitch.
Related
Item
3-4-3
Related
Item
5-5-2
Related
Item
Related
Item
- Turn
upward to
change
the posi-
tion of the
opening.
11119
50306D1
4-1
4-1