Horizon Fitness Bookletmaker SPF-200A Manual page 76

3-7 Manual Feeding
If has been selected,
1. Press the Start button.
The machine will prepare for manual feeding.
When it is ready, the machine will "beep."
2. Insert a sheet in the manual feed section.
- Push the sheet toward the manual feed stopper
and hold it.
When the sensor detects the sheet, the upstream
device starts feeding. The manual feed stopper
moves down to match the sheet fed from the collator,
and the sheet on the manual feed section is fed.
To continue the binding operation,
3. Insert the next sheet in the manual feed section.
4. Press the Stop button after the binding operation is
finished.
When the accessory slide is attached
on IFU-200, manual feed sheets can
be fed smoothly. Use it if necessary.
If has been selected,
1. Make the production speed slower so that you can
do manual feeding.
2. Press the Start button.
The machine prepares for manual feeding. When
it is ready, the machine will "beep."
3. Insert a sheet in the manual feed section.
- Push the sheet toward the manual feed stopper
and hold it.
When the sensor detects the sheet, the upstream
device starts feeding. The manual feed stopper
moves down to match the sheet fed from the collator,
and the sheet on the manual feed section is fed.
4. The collated sheets are fed from the upstream
device with a uniform timing. Insert the sheets in
the manual feed section to match the feeding of
the collated sheets.
If the manual feeding is not done in time, the sheets
fed from the upstream device will stop in the jog sec-
tion. Remove the sheets or press the Start button
again to eject the sheets to the faulty set ejecting tray.
5. Press the Stop button after the binding operation is
finished.
68
11119
30701H1
Start Button
Stop Button
Slide
Manual Feed
Stopper
21102
30701K1
11119
30701I1
11119
30701J1
Binding-Operation Screen