Paper Insertion Kit Pn-200; Operation - Horizon Fitness Bookletmaker SPF-200A Manual

8-2

Paper Insertion Kit PN-200

8-2-1 Operation

1
Load sheets to be inserted on the
using lowest bins on the collator.
The size of sheet which can be inserted
- A inserted sheet is transported by the trans-
port pusher for paper insertion. And the
transport pusher for paper insertion waits
200 mm far from the fore-edge jog plate.
This waiting position does not depends on
the sheet size.
The waiting position for the transport pusher
can be adjusted by changing the value of
the transport pusher position on the Colla-
tor/Faulty Set Detect/Manual Feed Stitch
screen.
- The size of inserted sheets should be large
enough to be brought to the transport
pusher. (If it is too small, the sheet cannot be
reached to the transport pusher.)
- A inserted sheet is inserted between the
stopper and transport pusher. Some space
between the transport pusher and the sheet
is needed.
a Tawer
Transport Pusher for
Paper Insertion (Option)
11119
10205C1
This pusher transports the flat
sheet when it is inserted into the
middle page of a stitched booklet.
11119
10205E1
Stopper
Sheet Inserted Transport Pusher
for Paper Insertion
8-2-1
Operation
m,c Tawer
11119
80201A1
Sheets to be
inserted
21102
80201C1
Fore-edge
Jog Plate
200 mm
21102
80201D1
159
8