Horizon Fitness Bookletmaker SPF-200A Manual page 196

8-6 Thickness Detector TD-200
5
Start binding.
- After the start of binding, the first booklet
thickness is stored in the machine. The sec-
ond and later booklet thicknesses are deter-
mined based on the stored thickness.
- The reference thickness value is updated
every four booklets during operation.
- The stored booklet thickness is cleared
when the machine stops.
- If misdetection occurs frequently, the reflec-
tor may be dirty, or the trim is attached to the
clamp. Wipe the reflector or remove the trim
on the clamp.
When using the booklet thickness detector
while the faulty set eject function is active, the
production speed is limited.
A4-Finish : Maximum 3,800 booklets per hour
A5-Finish : Maximum 4,600 booklets per hour
188
8-6-3
Operation