Mis-Stitch Detector Sds-200; Installation Of Mis-Stitch Detector - Horizon Fitness Bookletmaker SPF-200A Manual

8-5

Mis-stitch Detector SDS-200

8-5-1 Installation of Mis-stitch Detector

1
Prepare for the wiring on the front.
1. Remove the stitcher head front cover and
the stitcher head left cover.
2. Cut the nylon ties.
3. Attach two cable mounts on the position
shown in the figure at right.
4. Lead the cable as shown in the figure at
right.
2
Install the cable bracket.
Installation of Mis-stitch Detector
Four units of SDS-200 cannot be installed
for the Four Stitching Kit FST-200. Only two
units can be installed in the machine.
1 Stitcher Head Left Cover
2
2
3
1 Stitcher Head Front Cover
3
Cable Bracket
8-5-1
21102
80501A1
8
21102
80501F1
21102
80501E1
179