The Shape Of The Stitch Is Incorrect - Horizon Fitness Bookletmaker SPF-200A Manual

5-3 Stitch-Related Problems

5-3-9 The Shape of the Stitch is Incorrect

Stitch Pattern Where to Check
The clincher
points may
be worn out.
11119
50409A1
The wire
may be too
weak or thin.
11119
50409B1
The wire
may be too
weak or thin.
The wire
must be
straight.
The stitch
legs must be
the same
length.
11119
50409C1
The clincher
box must be
aligned with
the bender.
The wire
may be too
weak or thin.
The clincher
box must be
aligned with
the bender.
11119
50409D1
The booklet
may be too
thick.
104
Cause and Solution
- If the clincher points are worn, the
- Replace the clincher points.
11119
50409E1
- Use wire which is stronger or thicker.
- Use wire which is stronger or thicker.
- Adjust the angle of the eccentric
11119
50305A1
- Adjust the balance so that the right
1 3 5 7
-L- 0 2
11119
50409F1
- Install the clincher so that the cen-
1 3 5 7
-L- 0 2
11119
50409G1
- Use wire which is stronger or thicker.
- Install the clincher so that the cen-
1 3 5 7
-L- 0 2
11119
50409G1
- The maximum book thickness for stitching is 4 mm
(0.155").
stitch will not be bent completely.
shaft so that the wire is fed straight.
and left stitch legs are equal.
ter of the bender is aligned with the
center of the clincher box.
ter of the bender is aligned with the
center of the clincher box.
Related
Item
6-7
-
-
4-1
4-1
6-7
-
6-7
-