Horizon Fitness Bookletmaker SPF-200A Manual page 55

3-3 Doing a Changeover
- When you stop doing corner stitching and go to another binding pattern, or
- When you select corner stitching for the first time,
The stitch section moves to the left end, the top and bottom guides open, then the machine stops
before doing the changeover. (The top and bottom guide guides can be removed easily by hand.)
11119
30301L1
Replace the rear top
and bottom guides with
the corner stitch guide.
11119
30301R1
Replace the front top
and bottom guides with
the corner stitch guide.
Front corner stitching is optional.
11119
30301P1
Replace the front cor-
ner stitching guide with
the top and bottom
guides.
11119
30301N1
Replace the rear corner
stitching guide with the
top and bottom guides.
Parallel Adjustment
Press and hold the top and bottom guides, and
tighten the mounting screws.
- Fit the left end of each guide over the bolt head.
11119
30301M1
Remove the front
stitcher head drive
block.
11119
30301S1
Remove the rear
stitcher head drive
block.
11119
30301O1
Attach the rear stitcher
head drive block.
11119
30301Q1
Attach the front stitcher
head drive block.
3-3-1 Removing Parts Before
Top and
Bottom
Guide
Positioning
Pin
Fit here
Top and bottom guide mounting screws
Fit here
Locking Screws
11119
30301V1
the Changeover
Rear Corner Stitch Guide
11119
30301T1
11119
30301Z1
Top and bottom guide
mounting screws
11119
30301U1
47
3