Screen Descriptions; Setting-Binding Pattern Screen; Setting-Sheet Size Screen - Horizon Fitness Bookletmaker SPF-200A Manual

1-3

Screen Descriptions

1-3-1 Setting-Binding Pattern Screen

Binding Pattern Screen

1-3-2 Setting-Sheet Size Screen

Sheet Size-Saddle Stitch Screen
Sheet Size-Side Stitch Screen
This icon blinks if the HOF-20/30 connected upstream of the
SPF-200A/200L has a problem.
- After the power is turned on, the Initial Screen and Binding
Pattern Screen are displayed.
- The binding pattern can be selected on this screen. Press
one of the icons, and the Sheet Size screen shown below
is displayed.
If the SSK-200A or the SSK-200L has been selected on the
Administrator Mode-Option Screen, these icons are active.
21102
10301A1
The dimensions are entered in steps of 0.1 mm (0.005").
Sheet Size
Press one of these buttons for standard size sheets, and the
dimensions are entered automatically.
Press this button after entering the sheet size.
OK
The Finishing Size screen (next page) is displayed.
21102
10302A1
Booklet Thickness
Measure the thickness using a caliper (accessory), and enter the
value. The allowable range is 0.1mm (0.005") to 4.0mm (0.155").
=
The actual positions of the guides and stoppers may be
different from the set positions. If there is a problem with
the binding quality, send all of the parts to the home posi-
tions before doing the changeover.
21102
10302B1
=
=
Setting-Binding Pattern Screen
No changeover is performed and the
Binding screen is displayed.
Each section returns to its home
position and then starts the changeover.
The machine starts the changeover with
going to the home positions.
1-3-1
1
13