Fold Section - Horizon Fitness Bookletmaker SPF-200A Manual

1-2 Machine Descriptions

1-2-7 Fold Section

Press
Fold Rollers
Rollers
The gap between the rollers
is automatically set to match
These rollers
the booklet thickness
compress the
entered on the touch panel.
booklets.
Sheet Guide Locking Knobs
If sheets jam between the fold rollers and press rollers, remove the sheet guide by loosening these knobs.
Fold Skew Correction
Knob
As shown in the illustration, any
fold skewing can be corrected
by turning this knob clockwise.
Fold Section Top and Bottom Guides
-These guides jog the sheets before folding.
-The settings listed below can be done using the touch panel.
- Distance between guides when jogging sheets
- Stroke (Guide opening when the sheet comes in)
- Delivery stroke (Guide opening when the sheet
goes out)
The fold section stopper can be reached by opening this cover.
Buckle Gap Adjusting Knob
The buckle gap can be adjusted in three levels
to match the sheet thickness.
Fold Knife Height Adjusting Knob
The fold knife lifts when you turn this knob clock-
wise. (If you lift the fold knife too far, it may hit the
fold roller.)
Handwheel
The fold roller and press rollers can be turned by hand for clean-
ing.
11119
10207F1
Fold Section Jog Pushers
-These pushers jog the sheets
before folding.
-The positions of these pushers
when jogging the sheets can be
adjusted on the touch panel.
(Refer to 1-3-7.)
11119
10207B1
Forward Rollers
These rollers transport the sheets to
the fold section and prevent the sheets
from bouncing.
Sheet Hold-Down Plate
These plates prevent the sheets from
floating.
11119
10207A1
WARNING
Do not open this cover while the machine
is running. Otherwise, moving parts can
cause severe personal injury.
WARNING
Press the Emergency Stop button before
turning the handwheel. A sudden acciden-
tal start of the machine can cause severe
personal injury.
1-2-7
Fold Section
1
11119
10207D1
11119
10207E1
9