Horizon Fitness Bookletmaker SPF-200A Manual page 75

3-7 Manual Feeding
3
Start Binding
If has been selected,
1. Press the Start button.
The machine prepares for manual feeding.
When it is ready, the machine will "beep."
2. Insert the sheets for one set in the manual
feed section.
The sheets will be bound and delivered.
When the machine is ready for the next
sheets, the machine will "beep" again.
3. Press the Stop button after the binding oper-
ation is finished.
If has been selected,
1. Select the insertion mode using the Insert
Mode Selecting switch.
2. Press the Start button on the collator.
3. Place the sheets on the manual feed table of
the HMU.
If has been selected, the sheet will be
fed in one second after a sheet is placed on
the manual feed table, then the collating
will starts.
If has been selected, collating will start
one second after the sheet is placed on the
manual feed table, then the sheet is fed.
11119
30701E1
1
3
11119
30701F1
Align the sheets on this side.
Hand Marry Unit
Insert Mode Selecting
Switch
= The manual feed unit is
OFF
Insert sheets after
you hear the "beep."
2
Sheet which
is being fed
manually
11119
30701G1
= A manually fed sheet is
inserted below the collated
sheets.
= A manually fed sheet is
inserted above the collated
sheets.
turned off.
67
3