Operation - Horizon Fitness Bookletmaker SPF-200A Manual

8-1 Preset Kicker PK-30

8-1-2 Operation

1
Set the preset kicker (PK-30) to
match with a booklet width.
- Set the longer stopper bar outside of the
delivered booklet.
- Set the shorter stopper bar, which is pushed
down when kicking, so that it hits the side of
the delivered booklet as shown in the figure
at right.
Small booklets or thin, booklets easy to
bend may be not kicked properly. In this
case, use the offsetting function controlling
the delivery conveyor speed instead of
using the preset kicker.
2
Set up the Number of booklets in a
batch on the touch panel.
1. Press
2. Press
of booklets in a batch.
3. Press
3
Start binding.
After delivery of booklets in the preset num-
ber, a booklet is skewed to separate.
158
.
and set up the number
to enter the value.
Shorter Stopper Bar
11119
80102A1
Longer Stopper Bar
Operation Screen
21102
80102B1
Numerical Key Pad Screen
21102
80102C1
8-1-2
Operation
Fore-edge Trim Section