Do A Test Binding And Check The Settings - Horizon Fitness Bookletmaker SPF-200A Manual

3-4 Doing a Test Binding

3-4-3 Do a Test Binding and Check the Settings

In the example used in this section, we will
describe a job with saddle stitching with fore-
edge trimming.
1
Press .
The sheets for one set are delivered from
the upstream device, and the sheets stop at
the jog section.
- The Binding-Fine Adjust-Stitch Section
screen is displayed.
This button is not available if manual feeding has
been selected. Place the sheets directly in the jog
section and go to step 2.
Adjusting the jog section
2
Press .
The sheets will be jogged.
- Open the cover and check if there is a gap
between the sheets and the guides or the
stopper.
If there is a gap, correct this:
A: Distance between the jog plate and the
stopper
B: Top and bottom guide width
(These items can be adjusted only while
sheets are being jogged.)
- To test the stitcher, close the cover and
press .
- If is pressed while the sheets are
being jogged, the sheets will be released.
3
Press .
The sheets will be transported to the fold
section.
56
3-4-3 Do a Test Binding and Check
Binding-Operation Screen
21102
30403A1
Binding-Fine Adjust-Stitch Section Screen
A A
F F
21102
30403B1
J J J
21102
30403C1
the Settings
B B
G G