Horizon Fitness Bookletmaker SPF-200A Manual page 48

3-2 Setting Up a Job Using the Setting Screen
2
Enter each dimension.
- Enter in steps of 0.1 mm (0.005").
A: Sheet Length
B: Sheet Width
Saddle Stitch/Fold Only/Pass Through
Sheet Size
Max. mm (inch)
(For the SPF-200A)
Max. mm (inch)
(For the SPF-200L)
Min. mm (inch)
Top/Side Stitch
Sheet Size
Max. mm (inch)
Min. mm (inch)
Top Stitch and Fold
Sheet Size
Max. mm (inch)
Min. mm (inch)
Corner Stitch
Sheet Size
Max. mm (inch)
Min. mm (inch)
C: Stitch Position
- Half of the sheet length is automatically
displayed.
D: Stitch Distance
E: Booklet Thickness
- Measure the thickness using a caliper
(accessory) and enter the value within 0.1
to 4.0 mm (0.005" to 0.155").
40
A=Length B=Width
508.0 356.0
(20.000") (14.000")
610.0 356.0
(24.015") (14.000")
180.0 120.0
(7.090") (4.725")
A=Length B=Width
432.0 356.0
(17.000") (14.000")
138.0 180.0
(5.435") (7.090")
A=Length B=Width
432.0 356.0
(17.000") (14.000")
180.0 180.0
(7.090") (7.090")
A=Length B=Width
364.0 326.0
(14.330") (12.820")
210.0 210.0
(8.270") (8.270")
When doing saddle stitching -
Sheet Size Screen
A A
B B
C C
21102
30201B1
When doing side stitching -
Sheet Size Screen
A A
B B
D D
21102
30201C1
No changeover is
HOF Error
done and the Bind-
Icon
ing screen is dis-
played.
All sections return to their home positions before beginning the changeover.
The range of sheet sizes available can be limited if the
sheets are fed from the machines listed below.
- VAC-100/60H/1000/600H
Max. W 350.0 X L 500.0 mm (13.775" X 19.685")
Min. W 120.0 X L 148.0 mm (4.725" X 5.830")
- HOF-20/30
Max. W 350.0 X L 500.0 mm (13.775" X 19.685")
Min. W 200.0 X L 275.0 mm (7.875" X 10.830")
- ST-40 (Only when the ST-40 is used as bypass to the stitcher)
Max. W 350.0 X L 500.0 mm (13.775" X 19.685")
Min. W 182.0 X L 128.0 mm (7.166" X 5.040")
- BC-20
Max. W 350.0 X L 500.0 mm (13.775" X 19.685")
Min. W 128.0 X L 148.0 mm (5.040" X 5.827")
* When the LG-1000 is installed on the VAC-100 or the
VAC-1000, the maximum available length for the
SPF-200L is 610 mm (24.015").
* When the ST-40 is connected with the SPF-200L,
even a long sheet (up to 610 mm or 24.015") can be
rejected to the ST-40, if the stopper plate for the ST-
40 is removed.
Select one of these
if you are using a
standard size
sheet.
OK
E E
The machine starts the
changeover.