Horizon Fitness Bookletmaker SPF-200A Manual page 90

4-3 Jog Section Adjustments
Top and Bottom Guide Parallel
Adjustment
- Check that the top and bottom guides are parallel
to the frame of the machine. If the machine is
installed with the casters touching on the floor, the
frame itself may be distorted. The machine must
be installed correctly so that it remains horizontal.
- This adjustment must be done by an administrator.
How to Adjust
1
The Administrator Mode screen is
displayed.
2
Press
The Guide Movement screen is displayed.
3
Press
The top and bottom guides move out.
- The top and bottom guide becomes free to
move manually.
4
Loosen the mounting screws for
the top and bottom guides on the
front and rear.
5
Move the top and bottom guides
out, then tighten the mounting
screws.
- Fit the left end of each guide over the bolt
head.
6
Press the
Guide Return screen.
The top and bottom guides return to their
original setting positions.
82
.
.
button in the
Administrator Mode Screen
2
Guide Movement Screen
3
Top and Bottom Guide
Fit over the bolt
Mounting Screw
head.
Fit over the bolt
head.
Guide Return Screen
6
21102
40301F1
21102
40301G1
Top and Bottom Guide
Mounting Screws
11119
40301H1
21102
40301I1