Danfoss VLT AutomationDrive FC 361 Programming Manual page 80

Parameter Descriptions
5-60 Terminal 27 Pulse Output Variable
Option:
[103] Motor Current
[104] Torque rel to
limit
[105] Torq relate to
rated
[106] Power
4 4
[107] Speed
[108] Torque
[109] Max Out Freq
[113] Ext. Closed
Loop 1
5-62 Pulse Output Max Freq #27
Range:
Size
related Hz]
*
5-63 Terminal 29 Pulse Output Variable
Option:
[0] No operation
[45] Bus ctrl.
[48] Bus ctrl.,
timeout
[100] Output
frequency
[101] Reference
[102] Feedback
[103] Motor Current
[104] Torque rel to
limit
[105] Torq relate to
rated
[106] Power
[107] Speed
[108] Torque
[109] Max Out Freq
[113] Ext. Closed
Loop 1
5-65 Pulse Output Max Freq #29
Range:
Size
related Hz]
*
78
Function:
Function:
[0 - 32000 Set the maximum frequency for
terminal 27 corresponding to the
output variable selected in
parameter 5-60 Terminal 27 Pulse
Output Variable.
Function:
Select the display output for
terminal 29.
Function:
[0 - 32000 Set the maximum frequency for
terminal 29 corresponding to the
output variable set in
parameter 5-63 Terminal 29 Pulse
Output Variable.
Danfoss A/S © 03/2019 All rights reserved.
VLT® AutomationDrive FC 361
5-66 Terminal X30/6 Pulse Output Variable
Select the variable for readout on terminal X30/6.
This parameter is active when VLT
is installed in the frequency converter.
Same options and functions as parameter group 5-6* Pulse
Outputs.
Option:
[0]
*
[45]
[48]
[100]
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
[113]
5-68 Pulse Output Max Freq #X30/6
Range:
5000 Hz
®
General Purpose I/O MCB 101
Function:
No operation
Bus ctrl.
Bus ctrl.,
timeout
Output
frequency
Reference
Feedback
Motor Current
Torque rel to
limit
Torq relate to
rated
Power
Speed
Torque
Max Out Freq
Ext. Closed
Loop 1
Function:
NOTICE
[0 - 32000
*
Hz]
This parameter cannot be
adjusted while the motor is
running.
Select the maximum frequency on
terminal X30/6 referring to the
output variable in
parameter 5-66 Terminal X30/6 Pulse
Output Variable.
This parameter is active when VLT
General Purpose I/O MCB 101 is
installed in the frequency converter.
®
MG06J202