Danfoss VLT AutomationDrive FC 361 Programming Manual page 115

Parameter Descriptions
12-11 Link Duration
Range: Function:
Size [ 0 - 0 ] Read-only. Show the duration of
related the present link on each port in
*
dd:hh:mm:ss.
12-12 Auto Negotiation
Option: Function:
Configure auto negotiation of
Ethernet link parameters, for each
port: ON or OFF.
[0] Off Link Speed and Link Duplex can be
configured in parameter 12-13 Link
Speed and parameter 12-14 Link
Duplex.
[1] On
*
12-13 Link Speed
Force the link speed for each port in 10 Mbps or 100 Mbps. If
parameter 12-12 Auto Negotiation is set to [1] On, this parameter
is read-only and shows the actual link speed. If no link is present,
[0] None is shown.
Option: Function:
NOTICE
In POWERLINK, this parameter
is locked to 100 Mbps.
[0] None
*
[1] 10 Mbps
[2] 100 Mbps
12-14 Link Duplex
Force the duplex for each port to full or half duplex. If
parameter 12-12 Auto Negotiation is set to [1] On, this parameter
is read-only.
Option: Function:
NOTICE
In POWERLINK, this parameter
is locked to half duplex.
[0] Half Duplex
[1] Full Duplex
12-18 Supervisor MAC
Range: Function:
0 [0 - Show the MAC address of currently
*
2147483647 ] active supervisor.
12-19 Supervisor IP Addr.
Range: Function:
0 [0 - Show the IP address of currently
*
2147483647 ] active supervisor.
MG06J202
Programming Guide
4.11.3 12-8* Other Ethernet Services
12-80 FTP Server
Enables/disables the built-in FTP server.
Option:
[0]
*
[1]
12-81 HTTP Server
Enables/disables the built-in HTTP (web) server.
Option:
[0]
*
[1]
12-82 SMTP Service
Enables/disables the SMTP (e-mail) service on the option.
Option:
[0]
*
[1]
12-83 SNMP Agent
Option:
[0]
[1]
*
12-84 Address Conflict Detection
Option:
[0]
[1]
*
12-85 ACD Last Conflict
Range:
0
*
12-89 Transparent Socket Channel Port
Range:
Size
related
*
Danfoss A/S © 03/2019 All rights reserved.
Function:
Disabled Disable the built-in FTP server.
Enabled Enable the built-in FTP server.
Function:
Disabled Disable the built-in HTTP (web)
server.
Enabled Enable the built-in HTTP (web)
server.
Function:
Disabled Disable the SMTP (e-mail) service
on the option.
Enabled Enable the SMTP (e-mail) service on
the option.
Function:
Disabled Disable the local SNMP agent.
Enabled Enable the local SNMP agent.
Function:
Disabled Disable the function which detects
and resolves IP address conflicts
with this device in the network.
Enabled Enable the function which detects
and resolves IP address conflicts
with this device in the network.
Function:
[0 - The contested IP address of the
2147483647 ] most recent address conflict.
Function:
[ 0 - 65535 ] Configure the TCP port number for
the transparent socket channel. This
configuration enables FC telegrams
to be sent transparently on
Ethernet via TCP. Default value is
4000, 0 means disabled.
4 4
113