Danfoss VLT AutomationDrive FC 361 Programming Manual page 113
90–315 kw, enclosure sizes j8–j9
Hide thumbs
Also See for VLT AutomationDrive FC 361:
- Design manual (102 pages) ,
- Operating manual (82 pages) ,
- Service manual (370 pages)
Table of Contents
Advertisement
Parameter Descriptions
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
Range:
Function:
0
[0 - 9999 ]
This parameter shows a list of all
*
the defined frequency converter
parameters available for PROFINET.
9-82 Defined Parameters (3)
Array [116]
No LCP access
Read only
Range:
Function:
0
[0 - 9999 ]
This parameter shows a list of all
*
the defined frequency converter
parameters available for PROFINET.
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
Range:
Function:
0
[0 - 9999 ]
This parameter shows a list of all
*
the defined frequency converter
parameters available for PROFINET.
9-84 Defined Parameters (5)
Array [115]
No LCP access
Read only
Range:
Function:
0
[0 - 9999]
This parameter shows a list of all
*
the defined frequency converter
parameters available for PROFINET.
9-85 Defined Parameters (6)
Array [116]
No LCP access
Read only
Range:
Function:
0
[0 - 9999 ]
This parameter shows a list of all
*
the defined frequency converter
parameters available for PROFINET.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range:
Function:
0
[0 - 9999 ]
This parameter shows a list of all
*
the frequency converter parameters
deviating from default setting.
MG06J202
Programming Guide
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range:
0
*
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range:
0
*
9-93 Changed Parameters (4)
Array [116]
No LCP access
Read only
Range:
0
*
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range:
0
*
9-99 Profibus Revision Counter
Range:
0
*
Danfoss A/S © 03/2019 All rights reserved.
Function:
[0 - 9999 ]
This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
Function:
[0 - 9999 ]
This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
Function:
[0 - 9999 ]
This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
Function:
[0 - 9999 ]
This parameter shows a list of all
the frequency converter parameters
deviating from default setting.
Function:
[0 - 65535 ]
Readout of revision count.
4
4
111
Advertisement
Table of Contents
