Danfoss VLT AutomationDrive FC 361 Programming Manual page 71
90–315 kw, enclosure sizes j8–j9
Hide thumbs
Also See for VLT AutomationDrive FC 361:
- Design manual (102 pages) ,
- Operating manual (82 pages) ,
- Service manual (370 pages)
Table of Contents
Advertisement
Parameter Descriptions
5-14 Terminal 32 Digital Input
Option:
Function:
Select the function from the available digital
input range.
No operation Functions are described in parameter group 5-1*
Digital Inputs.
5-15 Terminal 33 Digital Input
Option:
Function:
Select the function from the available digital
input range and the additional options [60]
Counter A, [61] Counter A, [63] Counter B and
[64] Counter B. Counters are used in smart
logic control functions.
[0]
No operation Functions are described in parameter group
*
5-1* Digital Inputs.
5-16 Terminal X30/2 Digital Input
Option:
Function:
[0]
No operation This parameter is active when option
*
module VLT
is installed in the frequency converter.
Functions are described in parameter group
5-1* Digital Inputs.
5-17 Terminal X30/3 Digital Input
Option:
Function:
[0]
No operation This parameter is active when option
*
module VLT
is installed in the frequency converter.
Functions are described in parameter group
5-1* Digital Inputs.
5-18 Terminal X30/4 Digital Input
Option:
Function:
[0]
No operation This parameter is active when option
*
module VLT
is installed in the frequency converter.
Functions are described in parameter group
5-1* Digital Inputs.
MG06J202
Programming Guide
®
General Purpose I/O MCB 101
®
General Purpose I/O MCB 101
®
General Purpose I/O MCB 101
Danfoss A/S © 03/2019 All rights reserved.
4
4
69
Advertisement
Table of Contents
Need help?
Do you have a question about the VLT AutomationDrive FC 361 and is the answer not in the manual?
Questions and answers