Serial Interfaces And Data Exchange Module - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

Profinet io modular i/o-system fieldbus coupler
Hide thumbs Also See for WAGO-I/O-SYSTEM 750:
Table of Contents

Advertisement

210 • I/O Modules
Configuration and Parameter Setting of the Modules
5.3.5.6

Serial Interfaces and Data Exchange Module

PNIO
Module type
1SER
PNIO
Module type
1SER
Parameter
Asynchronous diagnostic
message
channel x
Module type member
75x-650, 75x-651, 75x-653, 75x-654
Length
Bit allocation
[Bit]
7
6
5
2
2
2
PD
6
-
RA
Input data channel 0 Byte
0
Input data
channel 0 Byte 1
channel 0 Byte 2
channel 0 Byte 32)
channel 0 Byte 42)
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
PD
Control 0 / Register REQ
6
RW
RA
Output data
channel 0 Byte 0
Output data
channel 0 Byte 1
Output data
channel 0 Byte 26)
Output data
channel 0 Byte 32)
Output data
channel 0 Byte 42)
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
2)
only available in 5-Byte-Mode, reserved in 3-Byte Mode
Value
locked*)
released
*) Default settings
Inputs
4
3
2
1
0
2
2
2
2
2
Status 0 / Register RES
Channel 0 / Table 0
Register data RD
Table 0, LB
Register data RD
Table 1, HB
Input data
Input data
Input data
Channel 0 / Table 0
Register data WR
Tab. 0, HB4) (LB5))
Register data WR
Tab. 0, LB4) (HB5))
Significance
The following occurs per diagnostics data sets and
diagnostics alarm when the receiver buffer overfills
not transferred to the I/O Controller
transferred to the I/O Controller
Instances
PNIO-Data type
Input
Unsigned 8
1
OctetString [5]
Note
6 byte are applied in the input and output
process image of the station proxy (field bus
coupler) by fitting the slot with this module
and are allocated to the physical module.
Data bytes 3 and / or 4 can be reserved
independent of the set type of operation. The
possible access to the register structure for
configurating purposes also depends on the
set type of operation. Two byte process data
qualifiers (IOPS, IOCS) are managed in the
direction of the I/O controller in the cyclic
PROFINET IO telegram for this module.
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents