Fault Types Of I/O Modules With Diagnostics Capability - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

82 • PROFINET IO 750-340
Diagnostics
Byte
offset
3.1.7.2.1.2

Fault Types of I/O Modules with Diagnostics Capability

The fault numbers 0x0000 / 0 to 0x000F / 15 contain standard messages. The
allocated meaning of fault numbers 0x001B / 27 to 0x001F / 31 are
recommended in the specification. Starting with fault number 0x0020 / 32,
the associated fault messages are reserved or can be used according to the
manufacturer specifications.
Fault number
Data type
Significance
0x0000 / 0 Reserved, not specified
0x0001 / 1 Short circuit
0x0002 / 2 Low voltage
0x0003 / 3 High voltage
0x0004 / 4 Overload
0x0005 / 5 Over temperature
0x0006 / 6 Wire Break
0x0007 / 7 Upper limit value exceeded
0x0008 / 8 Lower limit value undershot
0x0009 / 9 Fault
0x000A / 10
... reserved
0x000F / 15
0x0010 / 16 Configuration fault
0x0011 / 17 Transmitter or load voltage missing
0x0012 / 18 Fuse fault
0x0013 / 19 free
0x0014 / 20 Ground fault
0x0015 / 21 Reference channel fault
Description
0x0020
... Reserved
0x003F
0x0040 Wrong F Address of the PROFIsafe I/O
module (F-Slave)
0x0041 Invalid F Address of the PROFIsafe
I/O module (F-Slave)
0x0042 Wrong F Address of the I/O Controller
(F-Host)
0x0043 Invalid F Address of the I/O Controller
(F-Host)
0x0044 SIL class is not supported
0x0045 Wrong F-CRC length
0x0046 Wrong version of the F parameter set.
0x0047 Invalid CRC of the F parameter set
0x0048
... Reserved
0x00FF
0x0100
... Manufacturer specific
0x7FFF
0x8000
... Reserved
0xFFFF
WAGO-I/O-SYSTEM 750
PROFINET IO