Ssi Transmitter Interface - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

206 • I/O Modules
Configuration and Parameter Setting of the Modules
5.3.5.3

SSI Transmitter Interface

PNIO
Module type
1SSI
1SSI, EM
PNIO
Module type
1SSI
1SSI, EM
EA Type Module type member
SSI
75x-630
SSI_EM
Length Bit allocation
[Bit]
7 6 5
2 2 2
Input data channel 0
4
Byte 34) (Byte 05) )
Input data channel 0
Byte 24) (Byte 15) )
Input data channel 0
Byte 14) (Byte 25) )
Input data channel 0
Byte 04) (Byte 35) )
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
PD
6
F
RA
Input data K. 0 Byte 34)
(Byte 05) )
Input data K. 0
Byte 24) (Byte 15) )
Input data K. 0 Byte 14)
(Byte 25) )
Input data K. 0 Byte 04)
(Byte 35) )
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
PD
6
RW
RA
Output data K. 0 Byte 34)
(Byte 05) )
Output data K. 0
Byte 24) (Byte 15) )
Output data K. 0 Byte 14)
(Byte 25) )
Output data K. 0 Byte 04)
(Byte 35) )
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2 2
Status / Register RES
Channel 0 / Table 0
Register date RD
Table 0, LB5)
Register date RD
Table 0, HB5)
Register date RD
Table 0, HB4)
Register date RD
Table 0, LB4)
Control / Register REQ
Channel 0 / Table 0
Register date RD
Table 0, LB5)
Register date RD
Table 0, HB5)
Register date RD
Table 0, HB4)
Register date RD
Table 0, LB4)
Instances
PNIO-Data type
Input
Unsigned 32 1
Unsigned 8 [2]
1
Unsigned 32
Note
1 double word (4 byte) is applied in the input
process image of the station proxy (fieldbus
coupler) by fitting the slot with this module
and is assigned to this module. The quality
rating of the bytes are a result of the selected
data format. Two byte process data qualifiers
(IOPS, IOCS) are managed in the direction of
the I/O controller in the cyclic PROFINET
IO telegram for these modules.
3 words (6 byte) are applied in the output
process image of the station proxy (fieldbus
coupler) and 2 byte and 1 double word (4
byte) are assigned to the signal channel of the
module by fitting the slot with this module.
The quality rating of the bytes within the
double word are a result of the selected data
format. This module enables access to the
register structure of the I/O module for
configuration purposes. Two byte process
data qualifiers (IOPS, IOCS) are managed in
the direction of the I/O controller in the
cyclic PROFINET IO telegram for these
modules.
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
-
1