Channel Digital Input Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

5.3.1.5

16-Channel Digital Input Modules

PNIO
Module type
16DE
16DE(+16 BIT I)
* 16DE(-16 BIT I)
PNIO
Module type
16DE
16DE(+16 BIT I)
*16DE(-16 BIT I)
Parameter
WAGO-I/O-SYSTEM 750
PROFINET IO
Configuration and Parameter Setting of the Modules
EA Type Module type member
-
DI_16
DI_32
DI_0 -
Length Bit allocation
[Bit]
7 6 5
2 2 2
16 E7 E6 E5
E15 E14 E13 E12
E5 E4 E3
16
E13 E12 E11 E10
E3 E2 E1
E11 E10 E9
E7 E6 E5
E15 E14 E13 E12
Value
Inputs
4 3 2 1 0
2 2 2 2 2
E4 E3 E2 E1 E0
E11 E10 E9 E8
E2 E1 E0
E9 E8 E7 E6
E15 E14
E0
E8 E7 E6 E5 E4
E15 E14 E13 E12
▪ ▪ ▪
E4 E3 E2 E1 E0
E11 E10 E9 E8
Significance
I/O Modules
Instances
PNIOdata type
Input
Unsigned 16-Bit
field
1
Unsigned 32-
Bit field
- -
Note
16 or 32 bits are applied in the input process
image of the station proxy (fieldbus coupler)
by fitting a slot with these modules. The bits
0 15
2 to 2 are assigned with the signal
condition of the physically connected I/O
module. The bits marked green are made
available for the input and / or diagnostics
information of the following module slots.
One byte process data qualifier (IOPS) is
managed in the direction of the I/O controller
in the cyclic PROFINET IO telegram for
these modules.
The fitting of slots with this module enables
the remaining bit locations to be previously
filled with input modules without bytes
opened with star (bit fields) in the input
process image of the station proxy(fieldbus
coupler). The bit locations marked in a light
red color are respectively occupied by
previous slot allocations. One byte process
data qualifier (IOPS) is managed in the
direction of the I/O controller in the cyclic
PROFINET IO telegram for this module.
• 167
Output
-
-