Configuration And Parameter Setting Of The Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

162 • I/O Modules

Configuration and Parameter Setting of the Modules

5.3 Configuration and Parameter Setting of the Modules
5.3.1 Digital I/O Modules
5.3.1.1 2-Channel Digital Input Modules
PNIO
Module Type
2DE(+ 6 BIT I)
2DE(+ 14 BIT I)
2DE(+ 30 BIT I)
* 2DE(- 2 BIT I)
PNIO
Module Type
2DE(+ 6 BIT I)
2DE(+ 14 BIT I)
2DE(+ 30 BIT I)
* 2DE(- 2 BIT I)
Parameter
IO Type Module Type Substitute
75x-400, 75x-401, 75x-405, 75x-406,
DI_8
75x-410, 75x-411, 75x-412, 75x-413,
75x-416, 75x-427, 75x-435, 75x-438
DI_16
DI_32
75x-400*, 75x-401*, 75x-405*,
75x-406*,75x-410*, 75x-411*,
DI_0
75x-412*, 75x-413*,75x-416*,
75x-427*,75x-435*, 75x-438*
Length Bit allocation
[Bit]
7 6 5
2 2 2
2
2
E1
E1 E0
Value
Inputs
4 3 2 1 0
2 2 2 2 2
E1 E0
E1 E0
E0
Significance
Instances
PNIO Data Type
Input
Unsigned 8-Bit
field
Unsigned 16-Bit
1
field
Unsigned 32-Bit
field
- -
Note
8, 16 or 32 bits are applied in the input
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules.
0 1
The bits 2 and 2 are assigned with the
signal condition of the physically connected
2 7 15
I/O module. The bits 2 to 2 , 2 or 2
marked green are made available for the
input and / or diagnostics information of the
following modules. One byte process data
qualifier (IOPS) is managed in the direction
of the I/O controller in the cyclic PROFINET
IO telegram for these modules.
The fitting of slots with this module enables
the remaining bit locations to be previously
filled with input modules without bytes
opened with star (bit fields) in the input
process image of the station proxy (fieldbus
coupler). One byte process data qualifier
(IOPS) is managed in the direction of the I/O
controller in the cyclic PROFINET IO
telegram for these modules.
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
-
-
31