Channel Digital Output Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

5.3.2.6

8-Channel Digital Output Modules

PNIO
Module type
8DA
8DA(+8 BIT O)
8DA(+24 BIT O)
* 8DA(-8 BIT A)
PNIO
Module type
8DA
8DA(+8 BIT O)
8DA(+24 BIT O)
* 8DA(-8 BIT O)
WAGO-I/O-SYSTEM 750
PROFINET IO
Configuration and Parameter Setting of the Modules
EA Type Module type member
75x-530, 75x-536
DO_8
DO_16
DO_32
DO_0 75x-530*, 75x-536*
Length Bit allocation
[Bit]
7 6 5
2 2 2
8 A7 A6 A5 A4
8 A5 A4 A3 A2
A3 A2 A1 A0
A7 A6 A5 A4
Inputs
4 3 2 1 0
2 2 2 2 2
A3 A2 A1 A0
A1 A0
A7 A6
A7 A6 A5 A4
▪ ▪ ▪
A3 A2 A1 A0
I/O Modules
Instances
PNIO-Data type
Input
Unsigned 8-Bit
-
field
Unsigned 16-Bit
-
field
Unsigned 32-Bit
-
field
- -
Note
8, 16 or 32 bits are applied in the output
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules.
0 7
The bits 2 and 2 are assigned with the
signal condition of the physically connected
8 15 31
I/O module. The bits 2 to 2 or 2
green are made available for the output and /
or confirmation information of the following
modules. One byte process data qualifier
(IOCS) is managed in the transmission
direction of the I/O controller in the cyclic
PROFINET IO telegram for these modules.
The fitting of slots with this module enables
the remaining bit locations to be previously
filled with output modules without bytes
opened with star (bit fields) in the output
process image of the station proxy(fieldbus
coupler). The bit locations marked in a light
red color are respectively occupied by
previous slot allocations.
One byte process data qualifier (IOPS) is
managed in the transmission direction of the
I/O controller in the cyclic PROFINET IO
telegram for these modules.
• 181
Output
1
1
1
-
marked