Analog Input Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

192 • I/O Modules
Configuration and Parameter Setting of the Modules

5.3.3 Analog Input Modules

5.3.3.1 2-Channel Analog Input Modules
PNIO
Module type
2AE
2AE, EM
PNIO
Module type
2AE
2AE, EM
EA Type Module type member
AI 75x-452, 75x-454, 75x-456, 75x-461,
75x-462, 75x-465, 75x-466, 75x-467,
75x-469, 75x-472, 75x-474, 75x-475,
75x-476, 75x-477, 75x-478, 75x-479,
AI_EM
75x-480, 75x-483, 75x-485, 75x-491,
75x-492
Length Bit allocation
[Bit]
7 6 5
2 2 2
4 Input date channel 0, HB (LB)
Input date channel 0, LB (HB)
Input date channel 1, HB (LB)
Input date channel 0, HB (LB)
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
6 PD
F
RA
Input date / Register date RD
Channel 0 / Table 0, HB (LB)
Input date / Register date RD
Channel 0 / Table 0, LB (HB)
PD
F
RA
Input date / Register date RD
Channel 1 / Table 1, HB (LB)
Input date / Register date RD
Channel 1 / Table 1, LB (HB)
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
6 PD
RW
RA
Register date WR
Table 0, HB (LB)
Register date WR
Table 0, LB (HB)
PD
RW
RA
Register date WR
Table 1, HB (LB)
Register date WR
Table 0, HB (LB)
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2 2
Status / Register RES
Channel 0 / Table 0
Status / Register RES
Channel 1 / Table 1
Register REQ
Table 0
Register REQ
Table 1
Instances
PNIOData Type
Input
Integer 16 2
Unsigned 8
2
Integer 16
Note
2 words (4 byte) are applied in the input
process image of the station proxy (fieldbus
coupler) by fitting the slot with this module
and are assigned to the input signal channel
of the module using 1 word (2 byte) each.
The quality rating of the bytes are a result of
the selected data format. One byte process
data qualifier (IOPS) is managed in the
direction of the I/O controller in the cyclic
PROFINET IO telegram for this module.
3 words (6 byte) are applied in the output
process image of the station proxy (fieldbus
coupler) by fitting the slot with this module.
This module enables access to the register
structure of the I/O module for configuration
purposes. Two byte process data qualifiers
(IOPS, IOCS) are managed in the direction of
the I/O controller in the cyclic PROFINET
IO telegram for these modules.
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
-
2