Specialty Modules; Meter And Position Transmitter Interfaces - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

Profinet io modular i/o-system fieldbus coupler
Hide thumbs Also See for WAGO-I/O-SYSTEM 750:
Table of Contents

Advertisement

70 •
PROFINET IO 750-340
Process Image
3.1.5.2.5

Specialty Modules

3.1.5.2.5.1

Meter and Position Transmitter Interfaces

The group of meter and position transmitter interfaces is divided into
5 types of modules:
Type of module
The provider and consumer status (IOPS) of the input or output information
are exchanged between the I/O controller and I/O device in both directions
with meter and position transmitter interfaces. With the SSI Interface 75x-630,
there is also an additional possibility for exclusively transmitting the input
data of the transmitter. In this case, the I/O device only receives the consumer
status (IOCS) from the I/O controller and supplies it with the provider status
(IOPS).
The following table shows a list of the number of bytes for the individual
modules that are allocated in the respective process image (PA) and the
telegrams (TLG) in the direction of transmission and reception (Tx, Rx).
Description
1 (2)-channel meter module,
1CNT
32 (16) Bit input and output data
plus control and status byte per
signal channel, access to the
register structure using cyclic
data exchange
2CNT
2-channel analog output module,
16 Bit input and output data plus
control and status byte per signal
channel, access to the register
structure using cyclic data
exchange
SSI
SSI Interface,
32 Bit input data
SSI_EM
SSI Interface,
32 Bit input and output data plus
control and status byte per signal
channel, access to the register
structure using cyclic data
exchange
DII
Digital impulse interface,
24 Bit input and output data plus
control and status byte per signal
channel, access to the register
structure using cyclic data
exchange
ENC
Encoder Interface,
32 Bit input and output data plus
control and status byte per signal
channel, access to the register
structure using cyclic data
exchange
Substitute I/O modules
75x-404
75x-638
75x-630
75x-635
75x-631, 75x-634, 75x-637
WAGO-I/O-SYSTEM 750
PROFINET IO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents