WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration page 198

190 • I/O Modules
Configuration and Parameter Setting of the Modules
PNIO
Module type
* 2DE(-2 BIT I),
2ACK(-2 BIT O)
Length Bit allocation
[Bit]
7 6 5
2 2 2
2
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
E1
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
E1 E0
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
2
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
A1
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
A1 A0
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2 2
E1 E0
E0
▪ ▪ ▪
A1 A0
A0
▪ ▪ ▪
Note
The fitting of slots with this module enables
the remaining bit location to be previously
filled with input and / or output modules
without bytes opened with star (bit fields) in
the input and output process image of the
station proxy (fieldbus coupler). The bit
locations marked in a light red color are
respectively occupied by previous slot
allocations.
One byte process data qualifier (IOPS) is
managed in the transmission direction of the
I/O controller in the cyclic PROFINET IO
telegram for these modules.
WAGO-I/O-SYSTEM 750
PROFINET IO