Sytem Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

5.3.7 Sytem Modules

5.3.7.1 Supply Modules with 2 Bit Diagnostics Status
PNIO
Module type
2DIA
2 DIA(+6 BIT I),
DIA in E-PA
2DIA(+14 BIT I),
DIA in E-PA
2DIA(+30 BIT I),
DIA in E-PA
* 2DIA(-2 BIT I),
DIA in E-PA
PNIO
Module type
2DIA(+6 BIT I),
DIA im E-PA
2DIA(+14 BIT I),
DIA im E-PA
2DIA(+30 BIT I),
DIA im E-PA
* 2DIA(-2 BIT I),
DIA in E-PA
WAGO-I/O-SYSTEM 750
PROFINET IO
Configuration and Parameter Setting of the Modules
DIA_0
PE_DIA_8
PE_DIA_16
PE_DIA_32
PE_DIA_0
Length Bit allocation
[Bit]
7 6 5
2 2 2
2
2
D0
D0
Module type member
75x-610, 75x-611
75x-610*, 75x-611*
Inputs
4 3 2 1 0
2 2 2 2 2
D0
D0
▪ ▪ ▪
I/O Modules
Instances
PNIO-Data type
Input
- -
Unsigned 8-bit
1
field
Unsigned 16-bit
1
field
Unsigned 32-bit
1
field
- -
Note
8, 16 or 32 bits are applied in the input
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules.
0 1
The bits 2 and 2 in the input area are
assigned with the diagnostics condition of
the physically connected supply module. The
2 7 15 31
bits 2 to 2 , 2 or 2 marked green are
made available for the input and / or
diagnostics information of the following
modules. One byte process data qualifier
(IOPS) is managed in the direction of the I/O
control in the cyclic POFINET IO telegram
for these modules.
The fitting of slots with this module enables
the remaining bit locations to be previously
filled with input modules without bytes
opened with star (bit fields) in the input
process image of the station proxy(fieldbus
coupler). One byte process data qualifier
(IOPS) is managed in the direction of the I/O
controller in the cyclic PROFINET IO
telegram for these modules.
• 215
Output
-
-
-
-
-