Dali/Dsi Master - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

212 • I/O Modules
Configuration and Parameter Setting of the Modules
5.3.5.8

DALI/DSI Master

PNIO
Module type
DALI/DSI
PNIO
Module type
DALI/DSI
Parameter
Asynchronous diagnostic
message
channel x
Module type member
75x-641
Length Bit allocation
[Bit]
7 6 5
2 2 2
PD
6
-
RA
Input data channel 0 Byte
0
Input data
channel 0 Byte 1
channel 0 Byte 2
channel 0 Byte 3
channel 0 Byte 4
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
PD Control 0 / Register REQ
6
RW
RA
Output data
channel 0 Byte 0
Output data
channel 0 Byte 1
Output data
channel 0 Byte 2
Output data
channel 0 Byte 3
Output data
channel 0 Byte 4
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
Value
locked*)
released
*) Default settings
Inputs
4 3 2 1 0
2 2 2 2 2
Status 0 / Register RES
Channel 0 / Table 0
Register date RD
Table 0, LB
Register date RD
Table 1, HB
Input data
Input data
Input data
Channel 0 / Table 0
Register date WR
Table 0, LB
Register date WR
Table 1, HB
Significance
The following occurs per diagnostics data sets and
diagnostics alarm when the receiver buffer overfills
•
not transferred to the I/O Controller
•
transferred to the I/O Controller
Instances
PNIO-Data type
Input
Unsigned 8
1
OctetString [5]
Note
6 bytes are applied in the input and output
process image of the station proxy (fieldbus
coupler) by fitting the slot with this module
and are allocated to the physical module.
This module enables access to the register
structure of the I/O module for configuration
purposes. Two byte process data qualifiers
(IOPS, IOCS) are managed in the direction
of the I/O controller in the cyclic PROFINET
IO telegram for this module.
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
1