Digital Output Modules - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

168 • I/O Modules
Configuration and Parameter Setting of the Modules

5.3.2 Digital Output Modules

5.3.2.1 2-Channel Digital Output Modules
PNIO
Module type
2DA(+6 BIT O)
2DA(+14 BIT O)
2DA(+30 BIT O)
* 2DA(-2 BIT O)
PNIO
Module type
2DA(+6 BIT O)
2DA(+14 BIT O)
2DA(+30 BIT O)
*2DA(-2 BIT O)
EA Type Module type member
75x-501, 75x-502, 75x-509,
DO_8
75x-512, 75x-513, 75x-514,
75x-517, 75x-535
DO_16
DO_32
75x-501*, 75x-502*, 75x-509*,
75x-512*, 75x-513*, 75x-514*,
DO_0
75x-517*, 75x-535*
Length Bit allocation
[Bit]
7 6 5
2 2 2
2
2
A1 A0
A1 A0
Inputs
4 3 2 1 0
2 2 2 2 2
8, 16 or 32 bits are applied in the output
A1 A0
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules.
The bits 2
signal condition of the physically connected
I/O module. The bits marked green are made
available for the output and / or confirmation
diagnostics information of the following
module slots. One byte process data qualifier
(IOPS) is managed in the direction of the I/O
controller in the cyclic PROFINET IO
telegram for these modules.
The fitting of slots with this module enables
A1 A0
the remaining bit location to be previously
filled with output modules without bytes
opened with stars (Bit field) in the output
process image of the station allocator
(fieldbus coupler). The bit locations marked
in a light red color are respectively occupied
by previous slot allocations. One byte
process data qualifier (IOCS) is managed in
the direction of the I/O controller in the
cyclic PROFINET IO telegram for these
modules.
▪ ▪ ▪
Instances
PNIOdata type
Input
Unsigned 8-Bit
field
Unsigned 16-Bit
-
field
Unsigned 32-Bit
field
- -
Note
0 1
and 2 are assigned with the
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
1
-