Channel Digital Output Modules With 1 Bit Diagnostics Status Per Channel - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

5.3.2.7 8-Channel Digital Output Modules with 1 Bit Diagnostics Status per
Channel
PNIO
Module type
8DA
8DA,
DIA in E-PA
8DA(+8 BIT O)
8DA(+8 BIT I/O),
DIA in E-PA
8DA(+24 BIT O)
8DA(+24 BIT I/O),
DIA in E-PA
* 8DA(-8 BIT A)
* 8DA(-8 BIT I/O),
DIA in E-PA
PNIO
Module type
8DA
8DA(+8 BIT O)
8DA(+24 BIT O)
8DA(+8 BIT I/O),
DIA in E-PA
8DA(+8 BIT I/O),
DIA in E-PA
8DA(+24 BIT I/O),
DIA in E-PA
WAGO-I/O-SYSTEM 750
PROFINET IO
Configuration and Parameter Setting of the Modules
EA Type Module type member
75x-537
DO_8
DO_DIA_8
DO_16
DO_DIA_16
DO_32
DO_DIA_32
75x-537*
DO_0
DO_DIA_0
Length Bit allocation
[Bit]
7 6 5
2 2 2
8 A7 A6 A5 A4
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
8 A7 A6 A5 A4
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
D7 D6 D5 D4
8
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2 2
A3 A2 A1 A0
A3 A2 A1 A0
D3 D2 D1 D0
I/O Modules
Instances
PNIO-Data
type
Input
-
Unsigned 8-
Bit field
1
-
Unsigned
16-Bit field
1
-
Unsigned
32-bit field
1
- -
Note
8, 16 or 32 bits are applied in the output
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules..
0 7
The bits 2 and 2 are assigned with the
signal condition of the physically connected
8 15 31
I/O module. The bits 2 to 2 or 2
green are made available for the output and /
or confirmation information of the following
modules. One byte process data qualifier
(IOCS) is managed in the transmission
direction of the I/O controller in the cyclic
PROFINET IO telegram for these modules.
8, 16 or 32 bits are applied in the input and
output process image of the station proxy
(fieldbus coupler) by fitting a slot with these
0 7
modules. The bits 2 and 2 in the output area
are assigned with the signal condition of the
physically connected I/O module. The bits 2
15 31
to 2 or 2 marked green are made available
for the output and / or confirmation
information of the following modules. The
0 7
bits 2 and 2 in the input area are assigned
with the diagnostics condition of the
physically connected I/O module. The bits
marked green are made available for the
input and / or diagnostics information of the
following module slots. Two byte process
data qualifiers (IOCS, IOPS) are managed in
the transmission direction of the I/O
controller in the cyclic PROFINET IO
telegram for these modules.
• 183
Output
1
1
1
1
1
1
-
marked
8