Ink Cartridge Lamps; Machine Restrictions; Replacing Ink - MIMAKI TxF150-75 Operation Manual

Ink cartridge lamps

The lamps above ink cartridges indicate the status of the
loaded cartridges.
Cartridge lamps
Lamp status
Lit in green Normal (ink is being supplied)
Off No error
Lit or flashing in One of the following errors has occurred:
yellow • Ink near end
• Ink end
• Ink expired (1 month past)
Flashing red Ink expired (2 months past)
Lit in red One of the following errors has occurred:
• No ink cartridge inserted
• Other ink errors (
errors]
Flashing green Circulating operation is in progress.
Never remove the cartridge.

Machine restrictions

The ink expiration date is indicated on the ink pack.
Expired ink may cause ejection failures or alter the color
tone. Printing is possible even if the ink has passed its
expiration date. Nevertheless, we recommend replacing
with new ink or using up as quickly as possible.
Example: When the expiration date is April
May: Replace with new ink or use up as soon as possible.
Printing is possible.
June (lamp lit in yellow): Replace with new ink or use up
as soon as possible. Printing is possible.
July (lamp flashing red): Printing is not possible.
• The message appears on the display.
Description
P.5-5 [Ink
)

Replacing Ink

• When replacing with a new 600 ml ink cartridge
case, register the case weight. （
「Replacing with a New Ink Cartridge」
• When replacing with a new ink pack, the cartridge
weight does not need to be entered. (
10 「Correcting the Ink Cartridge Case
Weight」 )
 Removing the Ink cartridge
Remove the ink cartridge.
1
• When disposing of the product, contact an
industrial waste disposal operator or dispose of
the product in accordance with the local laws and
regulations.
 Replacing Ink Pack
Press the case tab with a finger to open the
1
lid.
Remove the old ink pack.
2
Place a new ink pack inside the ink
3
cartridge case.
• Push the ink pack connector into the ink cartridge
case slot with the double-sided tape attached side
facing down. Ink may not be supplied if the
connector is out of position.
Chapter 1 Before Use
P.3-9
)
P.3-
1-11
1
2
2
2
5
6