Usage Restrictions - MIMAKI JFX200-2513EX Safety Precautions

Hide thumbs Also See for JFX200-2513EX:

Usage Restrictions

This machine can be dangerous due to parts that move at high speeds, parts with high temperature and UV

curing units. This machine is to be used only by those having complete understanding of dangers associated

with these parts.

User Restrictions

This machine should only be operated by the trainees of our safety education program or those who have

been trained by such a trainee.

Area Restrictions

• Only adequately trained and versed individuals are allowed to come closer to the equipment. Set area

restrictions within the range shown in the following figure. As for the method of area restriction, the

machine should be installed in a dedicated room, and it should be enclosed for everyone to understand

that it is a danger zone.

• The danger zone should be prohibited for everyone except the trainees of our safety education program

or those who have been trained by such a trainee. If an untrained person enters the restricted area while

the machine is in operation, there is a risk of accidental contact with the Y-bar that is in the process of

printing, resulting in injury.

• Follow EN ISO23857 standards when securing the area with safety trellis.

• When installing the setup in a dedicated room, install locks and interlocks on the door of the room, and

lastly conduct risk assessment at the installation site before use.

1000 mm

or more

1000 mm or more

6400 mm or more

1000 mm

or more

Table of Contents

Show Quick Links