Cleaning Exterior Surfaces; Cleaning Jam Sensors - MIMAKI TxF150-75 Operation Manual

Chapter 4 Maintenance

Cleaning exterior surfaces

When the exterior surfaces of the machine are dirty, wipe
with a soft cloth dampened with neutral detergent diluted
in water and thoroughly wrung out.
• Do not allow liquids to get inside the machine.
Otherwise there is a risk of failure, electric
shock, or fire.

Cleaning jam sensors

The jam sensor is located on the side of the carriage.
Continuing to use it when it is dirty will rub dried ink and
adhering dust onto media, resulting in dirty prints.
4-10
Jam sensor