Cleaning The Exterior Surfaces; Cleaning The Platen; Cleaning Of After Heater Cover And Pre Heater Cover - MIMAKI JV400-LX Series Operation Manual

Cleaning the Exterior Surfaces

When the exterior surfaces of the machine are stained,
dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces
with the cloth.

Cleaning the Platen

The platen easily gets dirty with lint, paper dust, etc.
generated when a media is cut.
Wipe off conspicuous stains with a soft-hair brush, a dry
cloth, a paper towel, etc.
• When the platen is stained with ink, wipe
it off with a paper towel containing a
small amount of cleaning solution for
maintenance.
• Before cleaning the platen, make sure that the platen has cooled adequately.
• Because dust and dirt are easily accumulated in the slots for holding a media and cutting paper (cutter
line), be sure to clean these parts carefully.

Cleaning of after heater cover and pre heater cover

The after heater cover and the pre heater cover are easy to be dirty because of the powder of the medium etc.
If it shows dirt, wipe it with a soft cloth soaked in water or waterish mild detergent and wrung.
After heater cover
Maintenance
Pre heater cover
1
1
1
4
4-3