Switching Units With Starter - Siemens SINAMICS G120 Operating Instructions Manual

Advanced commissioning
6.7 Application-specific functions
6.7.1.4

Switching units with STARTER

Precondition
The inverter must be in the offline mode in order to change over the units.
STARTER shows whether you change settings online in the inverter or change offline in the
PC (
You switch over the mode using the adjacent buttons
in the menu bar.
Procedure
To change over the units with STARTER, proceed as follows:
1. Select the configuration
2. Go to the "Units" tab in the configuration screen form to change over the units
3. Changing over the system of units
4. Select process variables of the technology controller
5. Adapting to the line supply
6. Save your settings.
7. Go online.
The inverter signals that offline,
other units and process variables
are set than in the inverter itself.
8. Accept these settings in the invert-
er.
280
/ ).
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Converter with the CU240B-2 and CU240E-2 Control Units