Commissioning with STARTER
The STARTER software uses a series of dialogs to guide the user through the basic
commissioning of the Inverter. For specific application configuration and parameterization
the expert list within STARTER should be used.
This procedure assumes that you have a working knowledge of the STARTER software.
What do you need?
The following items are required to commission the Inverter with STARTER:
● The PC connection cable - order number: 3RK1922-2BP00 or the USB connection cable -
order number: 6SL3555-0PA00-2AA0.
● STARTER software installed on your PC - order number: 6SL3072-0AA0-0AG0 (the
version of STARTER should be version 4.1 Service Pack 3 or higher.
PC connection cable 3RK1922-2BP00
Version E02 or higher of the PC connection cable should be used with the SINAMICS
Getting Started, 07/2016, FW V3.63, A5E38556288B AA