Stopping And Restarting Setup Manually; Stopping Setup; Restarting Setup - Lenovo RackSwitch G8264 Application Manual

Stopping and Restarting Setup Manually

Stopping Setup

Restarting Setup

© Copyright Lenovo 2016
Follow these instructions to manually stop and start the Setup utility.
To abort the Setup utility, press <Ctrl‐C> during any Setup question. When you
abort Setup, the system will prompt:
Would you like to run from top again? [y/n]
Enter n to abort Setup, or y to restart the Setup program at the beginning.
You can restart the Setup utility manually at any time by entering the following
command at the administrator prompt:
RS G8264(config)# setup
69
Chapter 2: Initial Setup