Stopping And Restarting Setup Manually; Stopping Setup; Restarting Setup - Lenovo RackSwitch G8264CS Application Manual

Stopping and Restarting Setup Manually

Stopping Setup

Restarting Setup

62
G8264CS Application Guide for ENOS 8.4
Follow these instructions to manually stop and start the Setup utility.
To abort the Setup utility, press <Ctrl‐C> during any Setup question. When you
abort Setup, the system will prompt:
Would you like to run from top again? [y/n]
Enter n to abort Setup, or y to restart the Setup program at the beginning.
You can restart the Setup utility manually at any time by entering the following
command at the administrator prompt:
RS 8264CS(config)# setup