Lenovo RackSwitch G8264 Application Manual page 269

© Copyright Lenovo 2016
Table 23.
Static Flow Entry Qualifiers in OpenFlow 1.3
Qualifier
vlan‐vid
vlan‐pcp
ipv4‐src
ipv4‐dst
tcp‐src
tcp‐dst
udp‐src
udp‐dst
icmpv4‐type
icmpv4‐code
eth‐type
ip‐proto
ip‐dscp
arp‐op
mpls‐label
all
Table 24.
Static Flow Entry Actions in OpenFlow 1.0
Action
out‐put
set‐src‐mac
set‐dst‐mac
strip‐vlan‐id
set‐vlan‐id
set‐vlan‐priority
set‐nw‐tos
drop
Table 25.
Static Flow Entry Actions in OpenFlow 1.3
Action
output
output‐portchannel
Description
VLAN identifier (untagged, tagged or <0‐4094>)
802.1p(0‐7)
source IPv4 address and mask
destination IPv4 address and mask
TCP source port (0‐65535)
TCP destination port (0‐65535)
UDP source port (0‐65535)
UDP destination port (0‐65535)
ICMPv4 type
ICMPv4 code
ʺarpʺ/ʺ0806ʺ or ʺipʺ/ʺ0800ʺ or (hex‐value < =65535)
ʺtcpʺ or ʺudpʺ or 0‐255
IP DSCP (6 bits in ToS field)
ʺrequestʺ or ʺreplyʺ (can be set only if eth‐type is ARP)
MPLS label
all qualifiers or any qualifier
Description
ʺallʺ,ʺin‐portʺ,ʺfloodʺ,ʺcontrollerʺ or a valid port
change source MAC address
change destination MAC address
strip VLAN
set VLAN ID
set 802.1p priority (0‐7)
set IP TOS (0‐255)
drop the packet
Description
physical ports
reserved ports: all, controller, in‐port
Logical ports: static LAG (portchannel) or static LACP
LAG
269
Chapter 15: OpenFlow