Lenovo RackSwitch G8264 Application Manual page 163

For lenovo enterprise network operating system 8.4
Hide thumbs Also See for RackSwitch G8264:
Table of Contents

Advertisement

© Copyright Lenovo 2016
Table 14.
Multiple VLANs Example
Component
Description
G8264 switch
This switch is configured with three VLANs that represent 
three different IP subnets. Five ports are connected 
downstream to servers. Two ports are connected upstream to 
routing switches. Uplink ports are members of all three 
VLANs, with VLAN tagging/trunk mode enabled. 
Server 1
This server is a member of VLAN 1 and has presence in only 
one IP subnet. The associated switch port is only a member of 
VLAN 1, so tagging/trunk mode is disabled. 
Server 2 
This server is a member of VLAN 1 and has presence in only 
one IP subnet. The associated switch port is only a member of 
VLAN 1, so tagging/trunk mode is disabled. 
Server 3
This server belongs to VLAN 2, and it is logically in the same 
IP subnet as Server 5. The associated switch port has 
tagging/trunk mode disabled. 
Server 4
A member of VLAN 3, this server can communicate only with 
other servers via a router. The associated switch port has 
tagging/trunk mode disabled. 
Server 5
A member of VLAN 1 and VLAN 2, this server can 
communicate only with Server 1, Server 2, and Server 3. The 
associated switch port has tagging/trunk mode enabled. 
Enterprise 
These switches must have all three VLANs (VLAN 1, 2, 3) 
Routing 
configured. They can communicate with Server 1, Server 2, 
switches
and Server 5 via VLAN 1. They can communicate with 
Server 3 and Server 5 via VLAN 2. They can communicate 
with Server 4 via VLAN 3. Tagging/trunk mode on switch 
ports is enabled. 
Note: VLAN tagging/trunk mode is required only on ports that are connected to 
other switches or on ports that connect to tag‐capable end‐stations, such as servers 
with VLAN‐tagging/trunk mode adapters. 
To configure a specific VLAN on a trunk port, the following conditions must be 
met:
The port must be in trunk mode.
The VLAN must be in the trunk's allowed VLAN range. By default, the range 
includes all VLANs.
The VLAN must be un‐reserved.
The VLAN must be created.
The order in which these conditions are met is not relevant. However, all 
conditions must be met collectively. When all the conditions are met, the VLAN is 
enabled on the port. If one of the conditions is broken, the VLAN is disabled.
163
Chapter 9: VLANs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents