Acl Example 6 - Lenovo RackSwitch G8264 Application Manual

ACL Example 6
1. Configure an Access Control List.
2. Add ACL 4 to port 1.
© Copyright Lenovo 2016
This configuration blocks traffic from a network that is destined for a specific
egress port. All traffic that ingresses port 1 from the network 100.10.1.0/24 and is
destined for port 3 is denied.
RS G8264(config)# access­control list 4 ipv4 source­ip­address 100.10.1.0
255.255.255.0
RS G8264(config)# access­control list 4 egress­port 3
RS G8264(config)# access­control list 4 action deny
RS G8264(config)# interface port 1
RS G8264(config­if)# access­control list 4
RS G8264(config­if)# exit
Chapter 7: Access Control Lists
135