652
G8264 Application Guide for ENOS 8.4
Table 46.
Enterprise NOS‐Supported Enterprise SNMP Traps (continued)
Trap Name
swTcpHoldDown
swNTPSyncFailed
swNTPUpdateClock
swECMPGatewayUp
swECMPGatewayDown
swTempExceedThreshold
swFanFailure
swFanFailureFixed
swTempReturnThreshold
swStackMasterFromBackup
swStackDuplicateJoinAttempt
swStackLinkUp
swStackLinkDown
Description
Signifies that new TCP connection
requests from a particular client
will be blocked for a
pre‐determined amount of time
since the rate of new TCP
connections from that client has
reached a pre‐determined
threshold. The fltCurCfgSrcIp is the
client source IP address for which
new TCP connection requests will
be blocked. The swTrapRate
specifies the amount of time in
minutes that the particular client
will be blocked.
Signifies that synchronization with
the NTP server has failed.
Signifies that the system clock is
updated with NTP server.
Signifies that the ECMP gateway is
up.
Signifies that the ECMP gateway is
down.
Signifies that the switch
temperature has exceeded
maximum safety limits.
Signifies that fan failure has been
detected.
Signifies that the fan failure has
been fixed.
Signifies that the switch
temperature has returned to under
maximum safety limits.
Signifies that the switch has become
master from backup.
Signifies that a new switch with
duplicate UUID/bay has tried to
join the stack.
Signifies that a stack link has
become up.
Signifies that a stack link has
become down.