ISCLI Stacking Commands
© Copyright Lenovo 2016
Stacking‐related ISCLI commands are listed here. For details on specific
commands, see the RackSwitch G8264 ISCLI Command Reference Guide.
[no] boot stack enable
boot stack higigtrunk <port list>
boot stack mode {master|member} [<asnum>|master|backup|all]
boot stack pushimage {bootimage|image1|image2} <asnum>
boot stack vlan <VLAN>
connect <asnum>
copy log [swn <switch number>] stfp
copy log [swn <switch number>] tftp address <address> filename <file>
default boot stack {<asnum>|master|backup|all}
logging buffer severity <severity>
logging console severity <severity>
logging host <host instance> {address <address> | facility <facility> |
severity <severity>
[no] logging log stacking
no stack backup
no stack name
no stack switchnumber <csnum>
show boot stack [<asnum>|master|backup|all]
show logging [swn <configured‐switch‐number>] [ { messages | reverse
| severity <0‐7>}]
show stack attachedswitches
show stack backup
show stack dynamic
show stack link
show stack name
show stack pathmap [<csnum>]
show stack pushstatus
show stack switch
show stack switchnumber [<csnum>]
show stack version
stack backup <csnum>
stack name <word>
stack switchnumber <csnum> bind <asnum>
stack switchnumber <csnum> mac <MAC address>
319
Chapter 18: Stacking