Pvid/Native Vlan Numbers - Lenovo RackSwitch G8264 Application Manual

PVID/Native VLAN Numbers

© Copyright Lenovo 2016
Each port in the switch has a configurable default VLAN number, known as its
PVID. By default, the PVID for all non‐management ports is set to 1, which
correlates to the default VLAN ID. The PVID for each port can be configured to any
VLAN number between 1 and 4094.
Use the following command to view PVIDs:
RS G8264# show interface information
(or)
RS G8264# show interface trunk
Alias Port Tag Type RMON Lrn Fld Openflow PVID DESCRIPTION
VLAN(s)
Trk NVLAN
­­­­­­­ ­­­­ ­­­ ­­­­­­­­­­ ­­­­ ­­­ ­­­ ­­­­­­­­ ­­­­­­ ­­­­­­­­­­­­­­
­­­­­­­­­­­­­­­­­­­­­­­­
1 1 n External d e e d 1 1
2 2 n External d e e d 1 1
3 3 n External d e e d 1 1
4 4 y External d e e d 1 1
...
64 64 n External d e e d 1 1
MGT 65 n Mgmt d e e d 4095
4095
* = PVID/Native­VLAN is tagged.
# = PVID is ingress tagged.
Trk = Trunk mode
NVLAN = Native­VLAN
Use the following command to set the port PVID/Native VLAN:
Access Mode Port
RS G8264(config)# interface port <port number>
RS G8264(config­if)# switchport access vlan <VLAN ID>
For Trunk Mode Port
RS G8264(config)# interface port <port number>
RS G8264(config­if)# switchport trunk native vlan <VLAN ID>
Each port on the switch can belong to one or more VLANs, and each VLAN can
have any number of switch ports in its membership. Any port that belongs to
multiple VLANs, however, must have VLAN tagging/trunk mode enabled (see
"VLAN Tagging/Trunk Mode" on page 156).
Chapter 9: VLANs
155