Default Setup Options; Stopping Setup; Restarting Setup - Lenovo CN4093 Application Manual

10gb converged scalable switch
Hide thumbs Also See for CN4093:
Table of Contents

Advertisement

Default Setup Options

1. Connect to the switch.
2. Enter USERID as the default administrator and PASSW0RD (with a zero) as the
3. Enter the following command at the prompt:

Stopping Setup

Restarting Setup

50
CN4093 Application Guide for N/OS 8.3
The Setup prompt appears automatically whenever you login as the system
administrator under the factory default settings.
After connecting, the login prompt will appear as shown here.
Enter login username:
Enter login password:
default password.
CN 4093(config)# setup
To abort the Setup utility, press <Ctrl+C> during any Setup question. When you
abort Setup, the system will prompt:
Would you like to run from top again? [y/n]
Enter n to abort Setup, or y to restart the Setup program at the beginning.
You can restart the Setup utility manually at any time by entering the following
command at the administrator prompt:
CN 4093(config)# setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents