Chapter 12. Virtual Link Aggregation Groups - Lenovo RackSwitch G8264 Application Manual

For lenovo enterprise network operating system 8.4
Hide thumbs Also See for RackSwitch G8264:
Table of Contents

Advertisement

Chapter 12. Virtual Link Aggregation Groups

© Copyright Lenovo 2016
In many data center environments, downstream servers or switches connect to 
upstream devices which consolidate traffic. For example, see Figure
Figure 16. Typical Data Center Switching Layers with STP vs. VLAG
As shown in the example, a switch in the access layer may be connected to more 
than one switch in the aggregation layer to provide for network redundancy. 
Typically, Spanning Tree Protocol (RSTP, PVRST, or MSTP—see Chapter 11, 
"Spanning Tree Protocols) is used to prevent broadcast loops, blocking redundant 
uplink paths. This has the unwanted consequence of reducing the available 
bandwidth between the layers by as much as 50%. In addition, STP may be slow to 
resolve topology changes that occur during a link failure, and can result in 
considerable MAC address flooding.
Using Virtual Link Aggregation Groups (VLAGs), the redundant uplinks remain 
active, utilizing all available bandwidth.
Two switches are paired into VLAG peers, and act as a single virtual entity for the 
purpose of establishing a multi‐port aggregation. Ports from both peers can be 
grouped into a VLAG and connected to the same LAG‐capable target device. From 
the perspective of the target device, the ports connected to the VLAG peers appear 
to be a single LAG connecting to a single logical device. The target device uses the 
configured Tier ID to identify the VLAG peers as this single logical device. It is 
important that you use a unique Tier ID for each VLAG pair you configure. The 
VLAG‐capable switches synchronize their logical view of the access layer port 
structure and internally prevent implicit loops. The VLAG topology also responds 
more quickly to link failure and does not result in unnecessary MAC flooding.
VLAGs are also useful in multi‐layer environments for both uplink and downlink 
redundancy to any regular LAG‐capable device. For example:
Aggregation
Layer
STP blocks
implicit loops
VLAGs
Access
Layer
Servers
16.
ISL
VLAG
Peers
Links remain
active
209

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents