Exporting Profiles; Vmware Operational Commands - Lenovo RackSwitch G8264 Application Manual

Exporting Profiles

VMware Operational Commands

© Copyright Lenovo 2016
VM profiles for discovered VEs in distributed VM groups are automatically
synchronized with the virtual management server and the appropriate
hypervisors. However, VM profiles can also be manually exported to specific hosts
before individual VEs are defined on them.
By exporting VM profiles to a specific host, virtual machine port groups will be
available to the host's internal virtual switches so that new VMs may be configured
to use them.
VM migration requires that the target hypervisor includes all the virtual switch
port groups to which the VM connects on the source hypervisor. The VM profile
export feature can be used to distribute the associated port groups to all the
potential hosts for a given VM.
A VM profile can be exported to a host using the following ISCLI privileged EXEC
command:
RS G8264# virt vmware export <VM profile name> <host list> <virtual switch name>
The host list can include one or more target hosts, specified by host name, IPv4
address, or UUID, with each list item separated by a space.
Once executed, the requisite port group will be created on the specified virtual
switch. If the specified virtual switch does not exist on the target host, the port
group will not be created.
The G8264 may be used as a central point of configuration for VMware virtual
switches and port groups using the following ISCLI privileged EXEC commands:
RS G8264# virt vmware ?
dpg Distributed port group operations
dvswitch VMWare dvSwitch operations
export Create or update a vm profile on one host
pg Add a port group to a host
scan Perform a VM Agent scan operation now
updpg Update a port group on a host
vmacpg Change a vnic's port group
vsw Add a vswitch to a host
355
Chapter 20: VMready