Lenovo RackSwitch G8264 Application Manual page 240

For lenovo enterprise network operating system 8.4

Hide thumbs Also See for RackSwitch G8264:

Table of Contents

Trusted/Untrusted Ports

G8264 Application Guide for ENOS 8.4

By default, all ports on the G8264 are trusted. To configure untrusted ports,

re‐mark the DSCP value of the incoming packet to a lower DSCP value using the

following commands:

RS G8264(config)# interface port 1

RS G8264(configif)# dscpmarking

RS G8264(configif)# exit

RS G8264(config)# qos dscp dscpmapping <DSCP value (0‐63)> <new value>

RS G8264(config)# qos dscp remarking

Show Quick Links

Table of Contents

Troubleshooting